黄网站在线播放-黄网站在线观看-黄网站在线观看视频-黄网站在线免费-大陆一级毛片免费视频观看-大陆一级毛片免费视频观看i

Nowadays, as people's income levels are increasing, many people pay attention to cooking and preparing food in their daily lives. They purchase various kitchen appliances, including juicers, which can extract fresh juice. However, these juicers also require maintenance and cleaning, so many people need to remove the blades, but many do not know how to do so. Below is an introduction aboutJuice machine bladeDismantling knowledge!

1、 Why remove the juicer blade

Why dismantle the juicer blades? In fact, there are only two reasons for removing the blades. Firstly, the juicer needs to be completely cleaned. If the blades are not removed, it can be very dangerous during cleaning and may hurt your hands. On the one hand, if cleaning is carried out without removing the blade, some gaps cannot be cleaned thoroughly, which makes it impossible to achieve a high level of cleanliness. On the other hand, the reason for removing the blade is because the blade has been used for too long and may be damaged, which requires replacement.

2、 How to disassemble the juicer blade

How to disassemble the blades of a juicer depends on the model of juicer you purchased. Some juicer blades have better quality, so manufacturers directly integrate the blades with the juicer during production and cannot disassemble them. However, there are also some juicer blades that can be disassembled, and the disassembly method is relatively simple. As long as you can find the right checkpoint, you can easily remove the blade head, so you can disassemble the blade. The method is very simple. In addition, if you want to find the correct method, you can also refer to the juicer manual to see what the disassembly method is.

3、 What should be noted when disassembling

When disassembling the juicer blades, it is not only important to know, but also to understand what issues need to be noted during the disassembly process? In fact, there are many aspects to pay attention to when it comes to juicers. One is to pay attention to one's own safety when disassembling the blade. As the blade is very sharp, it is necessary to avoid touching it with fingers during the disassembly process. Even slight contact may cause injury; Secondly, since the blades have already been removed, a comprehensive cleaning is necessary in this situation, as the cleaning effect will be better after the blades are removed.

Maybe you haven't really understood the juicer before. The disassembly method is actually very simple. Whether it can be disassembled depends on the model of the juicer. For detachable blades, disassembly is relatively simple. You only need to twist them slightly by hand to remove them. However, at this time, you must pay attention to your safety. In addition, it is necessary to conduct a comprehensive cleaning after disassembly. If the blades are not sharp enough or there are other damages, they must be replaced in a timely manner so as not to affect the use of the juicer.